To log into your Orbi router, you can follow these steps:

• Connect your computer or mobile device to the Orbi router’s Wi-Fi network or using an Ethernet cable.
• Open a web browser (such as Chrome, Firefox, or Safari) on your connected device.
• In the address bar, type in either “http://orbilogin.com” or “http://192.168.1.1” and press Enter.
• This will take you to the Orbi router login page.
• By default, the Orbi router does not have a specific password. Instead, it uses the default administrator credentials. 
• The default username is usually “admin” (without quotes), and the password is typically “password” (without quotes). However, if you have changed these credentials in the past, you would need to use the updated username and password.

If you are unable to log into your Orbi router, there are a few things you can try:

• Ensure that you are entering the correct username and password. Double-check for any typos.
• If you have changed the username and/or password in the past and forgot them, you may need to perform a factory reset on the router (see instructions below).
• Make sure you are accessing the correct IP address or URL for your Orbi router. The default IP address is typically “192.168.1.1” or “http://orbilogin.com”.

To reset your Orbi WiFi, you can follow these steps:

• Locate the reset button on the back of your Orbi router.
• Using a paperclip or a similar object, press and hold the reset button for about 10 seconds until the LED lights on the router blink amber.
• Release the reset button.
• Wait for the router to reboot. This may take a few minutes.
• After the router has reset, you can set it up again using the Orbi app or through the web interface.

If you prefer to set up your Orbi without using the app, you can use the following steps:

• Connect your Orbi router to your modem using an Ethernet cable.
• Plug the Orbi router into a power source and wait for the power LED to turn solid white.
• Connect your computer or mobile device to the Orbi router’s Wi-Fi network or using an Ethernet cable.
• Open a web browser on your connected device.
• In the address bar, enter “http://192.168.1.1” or “http://orbilogin.com” and press Enter.
• Follow the on-screen instructions to set up your Orbi router.
• If you encounter any specific issues or error messages while trying to log in or set up your Orbi router, providing more details about the problem can help in providing a more accurate solution.

The IP address commonly used to access the Orbi login page is “192.168.1.1”. You can enter this IP address in the address bar of your web browser to access the Orbi router login page.

Alternatively, you can also access the Orbi login page by entering “orbilogin.com” in the address bar of your web browser. This URL will redirect you to the default IP address of the Orbi router.

If you see a warning that the Orbi login page is not secure, it may be because the router is still using the default self-signed SSL certificate. This certificate is used for encrypting the login credentials during the login process. While it is not a major security concern, it is recommended to update the router’s firmware to the latest version to ensure better security.

If you are experiencing issues with the Orbi login not working, here are a few troubleshooting steps you can try:

• Double-check that you are entering the correct IP address or URL for the Orbi login page.
• Ensure that your device is connected to the Orbi router’s Wi-Fi network or using an Ethernet cable.
• Clear the cache and cookies of your web browser and try accessing the login page again.
• Restart your Orbi router and try the login process again.
• If you have changed the default login credentials in the past and forgot them, you may need to perform a factory reset on the router and set it up again.

To set up your Orbi router without using the app, you can follow these steps:

• Connect your Orbi router to your modem using an Ethernet cable.
• Plug the Orbi router into a power source and wait for the power LED to turn solid white.
• On your computer or mobile device, go to the Wi-Fi settings and connect to the default Wi-Fi network of the Orbi router.
• Open a web browser and enter the default IP address of the Orbi router (usually “192.168.1.1”) or enter “orbilogin.com” in the address bar.
• Follow the on-screen instructions to complete the Orbi setup process.

If you encounter any specific issues or error messages during the Orbi login or setup process, please provide more details so that I can assist you further.